Skip to Content
24/7 Emergency Service (971) 253-7883
Top

Expert Tips: Choosing the Right Furnace & Installation Guide

Your home’s furnace plays a critical role in maintaining a comfortable living environment throughout the colder months. With various types, sizes, and efficiency levels available on the market, choosing the right furnace can feel daunting. However, a well-informed decision can significantly impact your long-term comfort, energy usage, and household budget. 

This comprehensive guide from Wolcott Services offers expert tips for selecting the perfect furnace and insights into the installation process. By understanding the essential factors to consider and learning about the steps involved in professional installation, you can feel confident in making the best choice for your home and enjoy a cozy, energy-efficient haven during the chilliest seasons.

Understand the Types of Furnaces

The first step in choosing the right furnace for your home is to familiarize yourself with the different types available. There are three primary kinds of furnaces:

  1. Gas: Gas furnaces are the most common type of furnace in the United States, primarily due to their energy efficiency and relatively low operating costs. They use natural gas or propane to heat and distribute the air throughout your home.
  1. Electric: Electric furnaces utilize electricity to heat the air before dispersing it into your living space. While they are generally less efficient and more expensive to operate than gas furnaces, they can be an ideal choice for homes without access to natural gas.
  1. Oil: Oil furnaces burn heating oil to produce heat, making them suitable for homes without access to natural gas or where electricity costs are high. They require more maintenance and can be less efficient than gas and electric furnaces.

Determine the Correct Furnace Size

The capacity, or size, of your furnace is crucial to maintaining efficiency and comfort in your home. A furnace that is too small will struggle to heat your home adequately, whereas an oversized furnace can lead to short-cycling, resulting in temperature fluctuations and increased wear-and-tear on the system. To determine the appropriate furnace size, consider these factors:

  1. Square Footage: The size of your home, measured in square footage, is a crucial aspect in determining the heating capacity required for your furnace.
  1. Climate: The climate in which you live affects heating demands. Homes in colder regions typically require higher-capacity furnaces to provide adequate heating.
  1. Insulation: Proper insulation can significantly impact your home’s heating needs. Well-insulated homes retain heat more efficiently, requiring less heating capacity from your furnace.
  1. Home Layout: The layout and design of your home, including the number of floors and rooms, as well as the presence of high ceilings or open floor plans, may influence the size and capacity of your furnace.

To ensure accuracy when determining the correct furnace size, consult with a heating and cooling professional who can perform a heat load calculation, taking into account your home’s unique characteristics.

Consider Furnace Efficiency Ratings

The efficiency of your furnace is indicated by its Annual Fuel Utilization Efficiency (AFUE) rating. This percentage reflects the amount of fuel your furnace converts into heat, with higher percentages indicating greater efficiency. For example, a furnace with an AFUE rating of 95% converts 95% of its fuel into heat, while the remaining 5% is lost during the combustion process.

When selecting a furnace, consider the following efficiency ratings:

  1. High-Efficiency Furnaces: These furnaces typically have an AFUE rating of 90% or higher and use advanced technology, such as sealed combustion or secondary heat exchangers, to minimize heat loss and reduce energy consumption.
  1. Standard-Efficiency Furnaces: With an AFUE rating of 80-89%, these furnaces are less efficient than high-efficiency models. They may be more affordable upfront, but they will result in higher energy bills over time.

Keep in mind that a higher-efficiency furnace may initially cost more but can save money in the long run through lower energy bills.

Assess Additional Features

Modern furnaces offer several additional features designed to enhance comfort, efficiency, and convenience. When choosing a furnace, consider whether these options align with your home’s needs and preferences:

  1. Variable-Speed Blowers: These furnaces feature blowers that can operate at various speeds, adjusting airflow depending on your home’s heating requirements. This feature provides greater temperature stability, improved air filtration, and reduced energy usage.
  1. Modulating Gas Valves: Modulating furnaces can adjust their heat output in small increments to match your home’s heating needs accurately. This leads to increased energy efficiency, consistent temperatures, and enhanced comfort.
  1. Zoned Heating: Zoned heating systems allow you to create separate temperature zones throughout your home, ensuring consistent temperatures and reducing energy consumption in areas of your home that are not frequently used.
  1. Smart Thermostats: These advanced thermostats can connect to your home’s Wi-Fi network, enabling remote access and control of your heating system. They also offer features such as learning capabilities, energy usage tracking, and integration with smart home devices.

Consult with a Professional

Choosing the right furnace for your home can be a complex process, and enlisting the help of a heating and cooling professional can greatly simplify the decision-making process. Our experienced technicians can assess your home’s unique needs, recommend the appropriate furnace size and type, and discuss efficiency ratings and additional features. Furthermore, a professional installer will ensure that your new furnace is correctly installed and optimized for peak performance, ensuring long-term comfort and energy efficiency.

Achieve Optimal Comfort with Us at Wolcott Services

Choosing the right furnace for your home is essential for achieving optimal comfort, energy efficiency, and long-term savings. By understanding the types of furnaces, determining the correct size, considering furnace efficiency ratings, and assessing additional features, you can confidently select the ideal heating system for your needs. With our assistance at Wolcott Services, a trusted provider of plumbing, electrical, heating, and cooling services in Portland, OR, you can ensure that your new furnace is expertly installed and customized to your home’s unique requirements.

For professional advice and help in determining the best furnace for your home, as well as expert installation and ongoing maintenance, today. Let our experienced technicians provide you with tailored furnace solutions so you can experience a warm, energy-efficient, and comfortable home during those chilly winter months.

The post Expert Tips: Choosing the Right Furnace & Installation Guide appeared first on Wolcott Services.

Categories: