One of the essential aspects of your home is the plumbing system. Plumbing problems can be aggravating. However, every homeowner will confront similar issues at some point. Some issues are simple to resolve, while others necessitate the assistance of a professional plumber. Because your main sewage line is in charge of draining all of the wastewater that travels down the drains, you may find yourself in a difficult situation if it clogs.
Here are 4 Ways to Unclog your Main Sewer without Using a Cleanout
In the end, you’ll need to hire a professional sewage line unclogger. There are, however, a few things you can attempt to alleviate the clog before your contractor arrives.
1. Determine the Source of the Clog
Identifying the primary cause will assist you in deciding on the best plan of action. While you could make informed guesses about the causes, such as grease buildup in kitchen sinks, hiring a professional is the best option. A skilled plumber, such as one from plumbing services in Hillsboro, will have the abilities and tools necessary to identify the problem and give a solution.
2. Make Use of Hot Water
To begin, run the water for 5 to 10 minutes on the hottest setting. The heat should expand the pipes, liquify any grease, loosen any food stuck to the pipe wall, and dislodge any other obstacles. This will not cure the problem, but it may help the next step go smoothly. If you’re not comfortable doing it yourself, you can always hire a plumber in Beaverton to fix your clogged drain.
3. Unclogging the Main Sewer Using a Plunger
Plungers are possibly the most well-known and widely used of all the basic household instruments for dealing with drain obstructions.
If you’ve recently used chemical drain cleaners, please wear gloves and goggles to avoid splashing. Clogs in all of your major drains can be cleared using a plunger. If there isn’t any water in the toilet, bathtub, sink, or shower, add some to boost the plunger’s suction.
To create suction in the drain, begin plunging with an upward and downward motion. Plunge 10–14 times. You’ve solved the clog if the water starts to drain again. Repeat the procedure if the water is still standing after two or three plunges.
4. Use a Chemical Drain Cleaner
It’s feasible to use a chemical drain cleaning. It’s a personal preference to do so before or after plunging, as some people prefer to employ chemicals after exhausting all other methods. Chemical drain cleaners come in various forms, but they all function by altering the chemistry of the blockage to break it down.
If you decide to go this way, make sure to follow the manufacturer’s directions and all safety precautions for the best results. You can choose to plunge again after using the chemical drain cleaning.
Sometimes the problem is simple and the DIY procedures outlined above will solve it, at least temporarily. Other times, you will need a professional with the right tools and know-how to get the job done. If you suspect a major sewer line obstruction, you must act quickly. Call Wolcott Services at (971) 253-7883 or send us an email to make even the most difficult blockages disappear.
The post 4 Approaches For Unclogging The Main Sewer On Your own appeared first on Wolcott Services.